Search Results for: dd-wrt/blog/biography/blog/biography


Setting up multiple WLANs in DD-WRT 14
Even for the extremely ungeeky, having WiFi available throughout your house is pretty much standard these days. And while the next logical step of securing that network via encryption (WEP is for n00bs — those in the know use WPA2-AES) may not be standard, it really should be. Assuming you do […]

Use DD-WRT to Create a Guest WiFi Network and Block ...


Kernel Version vs Firmware Version 6
In March of last year, I published this article claiming that the latest (at the time) DD-WRT builds based on the Linux 2.6 kernel (K2.6) ran faster on a Linksys/Cisco E4200 router than their K3.x counterparts. Since then, I’ve heard apocryphal stories from some in the DD-WRT forums that the […]

DD-WRT K2.6 vs K3.x vs Tomato Router Firmware Head to ...


Linksys WRT54G 4
I said “goodbye” to a couple of good friends today when I asked them to step down and retire after years of stellar performance. These two old friends were the last remaining Linksys WRT54G routers in use on any of my networks. I replaced them today, and in doing so, […]

Saying Goodbye To An Old Friend: Linksys WRT54G



Setting up multiple WLANs in DD-WRT 24
For the past while, I’ve recommended DD-WRT K2.6 firmware builds for the Linksys E4200 router, as well as other Linksys / Cisco WiFi routers. The builds based on the newer K3.x Linux kernel have now reached a stable enough point where you can run them… but I still recommend the […]

DD-WRT K2.6 Kernel vs. K3.x and How To Upgrade


WRT54G 12
Like many owners of the ubiquitous Linksys WRT54G wireless router, I like to run aftermarket firmware on my device to unlock more of this router’s potential. I use one as my primary wireless router in my house, but I also use some as wireless Ethernet client bridges and wireless repeaters. […]

Bricked WRT54G with Blinking Power Light. Hard reset? TFTP? Nope ...


Cisco/Linksys E4200 overclocked to 532 MHz 42
UPDATE: Newer versions of the DD-WRT firmware now include a web-based option for selecting your overclock speed, if it’s supported on your device. You can still follow these steps to overclock (and I recommend you continue reading so you understand what you’re doing), but now you can access overlocking on the Administration/Management tab. […]

How To: Overclock a Cisco/Linksys E4200 Router running DD-WRT



32
I’m going to start out this blog post by saying you should NOT do this. I repeat: do NOT do this. There’s at least a 50/50 chance that if you try this, it won’t work and you could potentially fry your router beyond the point of recovery. You might even […]

How to Unbrick a Netgear WNDR3400 N600 Router after a ...


Rasmus Lerdorf's opcache-status script 2
When I upgraded to PHP 5.5, I also said goodbye to my beloved APC cache (which never let me down) in favor of Zend OPcache, because it’s already part of the PHP package. Back when I used APC, one of my favorite tools was the apc.php script that showed cache status and allowed me […]

My Favorite Zend OPcache Status Scripts


14
In an effort to extend my WiFi coverage outside our vacation home on a lake, I purchased a Ubiquiti NanoStation LOCO M5. My goal was to provide a strong WiFi signal a few hundred feet into the back yard, onto the beach, and all the way out to the dock. […]

Connecting iOS devices (iPhone, iPad, iPod) to Ubiquiti NanoStation M5 ...